Need help finding the right tool to use on your project? Here are a few helpful guides.
A Tone Generator/Probe can be used to locate a single cable in a bundle of cables. A sound is generated by the tone generator, and with the probe you would touch the cables in the bundle to you can h...
A tool used to remove portions of insulation from a wire. You can find these items under our category Professional Modular Crimps, Strips, & Cuts Tool https://www.monoprice.com/category?c_id=105&cp_i...
The difference is the shape of the blade. 66 Type were used on older 66 type blocks which only supported up to CAT3 whereas the 110 Type blocks that are more common today will support up to CAT6 and p...
A spring-loaded tool that is used to insert conductors into IDC contacts when terminating on a 66/88/110 block. Punch-Down Impact Tool for 110/88 Type...
The tester comes with a 6ft jumper bnc cable and a 50ohm bnc female terminator. To test the cable connect one end of the cable to the tester and terminate the end of the cable to the 50ohm bnc female ...